|
|
About Asian Best
Components
| |
"Asian Best Components
Co., Ltd." was established in March, 1973. Ever since
its establishment, we have based on the concepts of
"Quality is our first priority job, Customer
Satisfaction, Continuous Improvement, Employee
Participation" to focus on the manufacturing technology
and quality improvement of our resistors. We provide the
excellent quality resistor products to our customers in
the business field of computers, TV, consumer
electronics, switching power supply and
telecommunication.
Through the
leadership of our past and current CEOs, we always
insist on the goal of "customer satisfaction" and
diligently move forward to face the challenges for the
past 30+ years. We take pride in the success of the
brand name of "FU” in the industry which is equal to the
concept of "Quality
Resistor" |
|
|
|
We truly believe that quality is our first
priority job in order to provide our customers the best
value-added resistor products. To meet the challenge of
globalization, ERP system is adopted to meet our customer's logistic
requirements. We request quality product, green product
is also rooted in our basic concept of design and raw
material selection to meet the responsibility of an
environment conscious member in the global village and
being a green partner to our
customers. | |
|
|
|
Our design engineers have the expertise and
experience to specialize in the manufacture and provide
the high quality, cost-effective resistors and the most
innovative solution for more than 30 years since 1973.
We offer a wide range of power resistors to its
worldwide customer base, we are the Power Resistor
Specialist since 1973. For more than three decades, we
have endeavored to provide both consistent quality
product and best customer service to the well-known
maker leaders in Monitors, TV, Switching Power Supply --
such as NASA, Philips, Sony, JVC, TDK, Yamaha, AUDI, TOYOTA, NISSAN, Chrysler, Delta, Lite-On and many
more. |
|
Through more than three decades, the four
more production sites have been established in China.
The overall employee number is six hundred with the
production capacity of more than 300 million pieces per
month. |
|
In order to provide the reliable professional
resistors to our customers, we have produced the
resistive film in-house, which is the most critical
content of the resistor product. Each resistor is
processed and treated as the most important components
on our production site, that proves our strict request
on resistor quality in order to meet our customers'
requirements. Each production site is equipped with the
advanced Quality Laboratory. We are ISO9001 (2000) certified and approved by BSI since 1997. In
2005, we have achieved ISO14001 certificate. In 2003, SONY also certified us as "Green Partner" for SONY TV and Monitor
products |
|
Capital:US$12,500,000 ( 2011 ) |
Main Products: |
Anti-Burst Fusible Resistor
(UL1412), Rated Current Fusible Resistor, Heat
Energy Surge Wire wound Fusible
Resistor, Thermal Fuse Cement
Resistor (UL1412), Cement Resistor, Power Chip
Resistor, Metal Plate Cement
Resistor (MPC / MPH), Aluminum Cased Power
Resistor, Metal Glaze Resistor (UL1676 /
EN60065), Surge Resistor (UL1676 / EN60065), High
Resistance Resistor, Low Ohmic Power Resistor (low inductance), Wire wound Resistor, Non Inductive
Resistor, Metal Oxide Resistor, Power
Wire wound Resistor, Current
Sensor Resistor, High
Power Resistor, Metal-Clad Power Wire wound
Resistor, Low resistivity Resistor,
Chip Resistor
(SMD). | |
|
|
|
12F-9, No.79, Sec.1, Hsin Tai Wu Road,
Hsi-Chih Dist., New Taipei City, Taiwan, R.O.C. TEL:
+886-2-2698-9988 (Rep.) FAX: +886-2-2698-9966 E-MAIL: sherry.abcomp@msa.hinet.net
Copyright ©2011 Asian Best Components Co.,
Ltd. | | |