¡@¡@ITEM
|
¡@SPEC.
|
¡@¡@¡@REMARKS
|
Load life under high temperature
|
¡Ó1.5%
|
JIS C 5201-1¡@¡@Rated voltage at 70¢J for 1000 hours
(4.25.1)¡@¡@¡@¡@
|
High humidity load life
|
¡Ó5%
|
JIS C 5201-1¡@¡@Rated voltage at 400C,95% RH for
1000 hours
(4.24)¡@¡@¡@¡@¡@
|
Temp. coeff. of resistance
|
¡Ó200 ppm/¢J
|
JIS C 5201-1¡@¡@Room temp. + 100¢J
¡@¡@¡@¡@¡@¡@¡@¡@
|
Short time overload
|
¡Ó 1%
|
JIS C 5201-1¡@¡@6.25 times the rated power for 5
seconds
(4.13)¡@¡@¡@¡@¡@
|
Temperature cycling
|
¡Ó1%
|
JIS C 5201-1¡@¡@5 cycles for ¡V25¢J¡Ó3¢J(30min)¡Froom
(4.19)¡@¡@¡@¡@¡@ temp.(30min)~ +85¢J¡Ó3¢J(30min) room temp.(30min)
|
Resistance to soldering heat
|
¡Ó1%
|
JIS C 5201-1¡@¡@260¢J¡Ó5 ¢J for 10 seconds(²k¿ü¼Ñ)
(4.18)¡@¡@¡@¡@¡@ 350¢J¡Ó10 ¢J for 3.5 seconds(¤â²k¿ü)
|
Insulation resistance
|
¡Ù50G
|
JIS C 5201-1¡@¡@500 V Insulation test 1min
(4.6.1.1)¡@¡@¡@¡@
|
UL Pulse withstanding voltage
|
¡Ó20%
|
|
¡½The following discharge cycle is repeated
in the circuit of the left fig. 2.5 sec. ON 2.5 sec. OFF 50 cycles.
Test voltage (DC source) 10KV(Max) |
|
Futaba Pulse withstanding voltage
|
¡Ó3%
|
|
¡½The following discharge cycle is repeated
in the circuit of the left fig. 1 sec. ON 1 sec. OFF 50 cycles. Test
voltage (DC source) is shown below:
¡½Pulse voltage
1/4W¡×¡]¡Ö8.5KV,Max¡×13KV¡^
1/2W¡×¡]¡Ö14KV,Max¡×20KV¡^ |
|